Using Teckwrap Vinyl is a tremendous option for personalizing different surfaces such as car bodies, coffee mugs, laptops, phone covers, and many more. It is available in different looks such as matte or glossy, depending upon which one you prefer to use. The texture is extremely thin that you must cut quite delicately to ensure a proper cut.
Similar to the cut part, there are several other things also that you must keep in mind while applying the wrap. Here we have listed down some common mistakes that you must avoid when applying the wrap.
Be Smart about Colors: The very first thing to consider is to get smarter with colors. You should know which colors will suit the surface for which you want the wrap. There is no point if the color of the wrap is not noticeable on the surface. Hence, you should choose the wrap extremely carefully.
- Pick the Correct Knife: These wraps are extremely thin and delicate. So, you must use the right knife for the cutting purpose. Use a sharp knife that can cut the wrap without tampering the edges. Often a blunt knife with not leave sharp edges and that will look bad after you have installed the wrap already.
- Keep Extra Material while Cutting: Never cut exactly the size that you want for the installation. Always keep some extra material while cutting. You can hold the extra material at the side to place the wrap correctly and then cut off the extra ones later on.
- Be Cautious while Placing It: Before you place the wrap on the surface, make sure that you estimate well where to place it and at what angle or so. Once you have installed the wrap, taking it out again for correction otherwise can get extremely messy. So, plan properly ahead so that you do not have to make this mistake.
- The Cleanliness Factor: Another major mistake that many users make is not keeping the surface clean. The slightest of dust or a single drop of moisture on the surface can cause difficulty in the installation of the wrap. So, be very sure to clean the surface properly with a piece of cloth before you start the installation of the wrap.
- Take Care of Oil: If you have just taken out any existing wrap or sticker from the surface, you must have used oil for the purpose. If the oil still remains on the surface, the wrap adhesive will not bond on the surface well. So, you must clean the surface carefully so that there is no oil left. This is one of the major mistakes that you must avoid.
- Treating Bubbles Correctly: It may happen that even after extreme care, the wrap may get some bubbles. Most people take out the entire wrap to install it once again in such a case. However, not only is this a messy process but also it can cause the adhesive of the wrap to weaken. In place of doing this, you can use a squeeze or heat gun to get rid of the bubbles completely from the wrap.
- Temperature Control for Cars: Temperature plays an eminent role during the wrapping of vinyl on any surface. You will require a slightly warm temperature after you have pasted the wrap. On the other hand, such high temperatures before the pasting can make the adhesive melt and lose. You must take special care about this if you are working on a car surface. Make sure that the car has cooled down properly before you start the work. Also, make sure that you do not start the installation work if the temperature outside is extremely hot.
- Give Some Time: The most important mistake that most people make is not offering enough time to wrap. After the installation process is done, you must offer enough time to bond with the surface. If you start using it instantly after the installation, the wrap may come out or may get bubbles. Leave the surface for at least 24 hours so that it permanently sits on the surface and you do not have trouble later on.
If you avoid these mistakes when applying Teckwrap vinyl, you will surely get great results. Of course, you must search for the best options in terms of quality and design. Shop at Crafty Cups By ACOL to choose from a wide range of Teckwrap vinyl that are not only impressive for their designs but also durable and of high-quality for your project needs.